• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

50 years diy, must reduce suite

]Here an idea of shipping cost ,all in US fund : USA = 250gr $14. 500gr $20 1kg $25 2kg $30 (please note only $5. for the last kg); for Canada same but in cdn fund
Europe : 250gr $14. 500gr $25. 1kg $45. (sea mail $24) 2kg $65 (sea mail $34.) over 2kg , sea mail not a choice ! Don't forget I need 100/125gr for shipping box .

23-------------16x MPSU10 4x MPSU56 2x MPSU10 2x MPSU60 9 MPSU 07 all new , genuine from around 1990 $120./33pcs (pic 9118)

24------------8x new Mundorf 47,000 uF 25 volt all tested within 10 % $100. 1kg (9115)

25------------12x new Mundorf 33,000uF 25volt all tested within 2% $120. 800g (9092)

27-----------SALE PENDING -2x brand new Mundorf 6.8uF 800ac/1200dc supreme silver/gold $160./pair, absolute great sound at reasonnable price ,but long burning time=200hrs.(9114) SALE PENDING

28------------4x brand new Audyn true copper .33uF 630v $90. per pair and 120gr (9114)

29a------------SOLD 2x new Audyn true copper .1 uF 630v $60./pair 50gr (9114) SOLD

30a---------2xSOLD 2x remain used Mundorf 1uF supreme silver/oil 800ac/1200dc $90./pair (wire cut but very usable to solder on board) (9114)

31------------4x used (very little ) Nichicon KG Super Through series ( don't mix with lower price(and sound) similar version but not Super Through $40./pair 500gr (9114)

32----------- 4x new power supply PCB (maintly class A, but fit others) $22./pair (35gr) fit 40mm diam capa (9083)

33------------4x new MrEvil capacitance multiplier power supply PCB (come with 4 LED and J112 transistors each set) $16./2 (9130)

34a------------(12x) only 8 now Elna Audio capa 12,000uF 63v , 35mmdiamX50mm , sell only by 4 unit $35./4 (9122)

35a------------(36x)only24 now Elna 10,000uF 50v (35mmX63mm) ,sell only by 4 unit $9.00/4 (9122)

36a------------(40x) only 28 now Nichicon 12,000uF 50v (30mmX50mm) , sell only by 4 unit $12.00/4 (9124)

37------------SOLD 2x PCM63 , 1x CS 8412 et 1x Tent , all for parts $35. (9132) SOLD

38------------3x new Salas SSLV 1.1 each are 2 regulators+ and one (minus) all boards on pic $35. (9139)

39----------- 1x B1 micro board dual mono , my way to do it . $7.00 each and get lot (genuine , no scrap here) 2SK389 or LSK389 ($12. and $10.) if you need it .
40------------3x Shigaclone pcb (from Tibi here on diyaudio),with all not easy to find IC/transistors +drive 101N 16 pins each set $50. or better
all 3 set + extra set of rare chip (3) for $120. (3set boxed 850gr) (9071 -9077-9079-9074 sorry unable to get clear pic with this last one) all in text .

41------------25x Ero MKC 4uF 200v , 4pcs for $5.00 If you take them all , will ad on few other value same type free . (9054)

42------------3x CDM4/19 pcb without TDA1541; Quad 66/Philips 473 /Hafler ; $12.each with tranformer $15. For shipping pcb without transformer
less than 500gr , 1 without+ one with good for less 1kg , take them all ! just under 2kg (all weight with shipping box) ( 9142)

43-------------1x Arcam Delta power supply $25. (9144)

44-------------1x Arcam Delta (250??) display $35. (9145)

45-------------4x PHL 1280 8ohm in very good condition (list around $120 each) $240./4 (9109)

yy--------------lot more to come ;)

xx----------- https://www.diyaudio.com/community/threads/50-years-diy-must-reduce.409885/#post-7646369
 

Attachments

  • IMG_9118.JPG
    IMG_9118.JPG
    337.7 KB · Views: 173
  • IMG_9115.JPG
    IMG_9115.JPG
    255.6 KB · Views: 153
  • IMG_9092.JPG
    IMG_9092.JPG
    327.1 KB · Views: 140
  • IMG_9114.JPG
    IMG_9114.JPG
    348.2 KB · Views: 148
  • IMG_9083 (1).JPG
    IMG_9083 (1).JPG
    330.7 KB · Views: 150
  • IMG_9122.JPG
    IMG_9122.JPG
    398.5 KB · Views: 135
  • IMG_9124.JPG
    IMG_9124.JPG
    409.4 KB · Views: 141
  • IMG_9130.JPG
    IMG_9130.JPG
    545.5 KB · Views: 144
  • IMG_9132.JPG
    IMG_9132.JPG
    485.6 KB · Views: 142
  • IMG_9139.JPG
    IMG_9139.JPG
    509.6 KB · Views: 143
  • IMG_9137.JPG
    IMG_9137.JPG
    350.9 KB · Views: 154
  • IMG_9071.JPG
    IMG_9071.JPG
    630.4 KB · Views: 94
  • IMG_9074.JPG
    IMG_9074.JPG
    667.5 KB · Views: 101
  • IMG_9077.JPG
    IMG_9077.JPG
    601 KB · Views: 97
  • IMG_9079.JPG
    IMG_9079.JPG
    443.1 KB · Views: 114
  • IMG_9054.JPG
    IMG_9054.JPG
    424.5 KB · Views: 121
  • IMG_9142.JPG
    IMG_9142.JPG
    541.7 KB · Views: 109
  • IMG_9144.JPG
    IMG_9144.JPG
    287.4 KB · Views: 105
  • IMG_9145.JPG
    IMG_9145.JPG
    335.2 KB · Views: 104
  • IMG_9109.JPG
    IMG_9109.JPG
    371 KB · Views: 118
Last edited: