Yes, dual mono CLCRC with 8X22000uf and 2 Hammond 159zg per channel. 2 Toroidy transformers 800VA 2X36V each.
@GKTAUDIO In post #979 up to #997 the pictures show you have one CL-60 on each current limiting board, which had me scratching my head. I see it's been resolved in the later posts. I mention this not to point out any errors, but to point out a potential issue that can easily happen. I hope the fix was completed before applying power. I didn't see any other posts identifying that as an issue and I felt worth a mention for noobs like myself following along and inspired by all the great pics/progress.
Hi, @birdbox; you are correct! I initially mounted only one, but I do so many visual inspections before ever completing a build or applying power, and this was a really good thing to catch. Essentially, I just thought about the circuit and realized the mistake, then corrected it before applying power.
Also would like to mention that these thermal pads from AAVID work really well, even if on the expensive side : https://gr.mouser.com/ProductDetail/532-4180
For some reason “anyone” excludes me…
I’m referring to the shared link in post #1021
